|
Thermoelectric Cooler's Specification Include:
TEC series for thermoelectric modules
for high heat pumping capacity applications
TEC Series Thermoelectric Module
Typical applications like: Food service refrigerator, portable cooler box for cars, liquid cooling and temperature stabilizer. Wine cabinets , Medical equipment, precise temperature control products!
|
|

Part Number
|
Data obtained at hot plate temperature Th=27°C.
|
Dimension
AxBxH
mm
|
Imax (amps))
|
DTmax(°C)
|
Vmax (Volts))
|
Qmax (watts))
|
|
|
3.3
|
69
|
1.90
|
3.90
|
15x15x4.8
|
|
|
3.50
|
7.20
|
20x20x4.8
|
|
|
8.60
|
16.40
|
30x30x4.8
|
TEC1-12703
|
15.0
|
29.30
|
40x40x4.8
|
TEC1-01704
|
3.9
|
69
|
2.00
|
4.00
|
15x15x4.7
|
TEC1-03104
|
3.66
|
7.30
|
20x20x4.7
|
|
|
8.40
|
16.70
|
30x30x4.7
|
|
|
15.00
|
33.40
|
40x40x4.7
|
TEC1-01705
|
5.0
|
68
|
2.00
|
5.60
|
15x15x4.3
|
|
|
3.66
|
10.30
|
20x20x4.3
|
|
|
8.40
|
23.70
|
30x30x4.3
|
|
|
15.00
|
42.50
|
40x40x4.3
|
TEC1-01706
|
6.0
|
68
|
2.00
|
6.90
|
15x15x4.0
|
|
|
3.66
|
12.50
|
20x20x4.0
|
|
|
8.40
|
28.70
|
30x30x4.0
|
|
|
15.00
|
51.40
|
40x40x4.0
|
TEC1-03108
|
8.5
|
68
|
3.75
|
16.80
|
20x20x3.3
|
TEC1-07108
|
8.60
|
38.50
|
30x30x3.3
|
|
|
15
|
68.09
|
40x40x3.3
|
|
|
15
|
68.09
|
50x50x4.7
|
TEC1-12710S
|
10
|
68
|
15.80
|
85.0
|
40x40x3
|
TEC1-12710
|
10
|
68
|
15.80
|
85.0
|
50x50x4.8
|
TEC1-07114
|
14
|
68
|
8.40
|
65.90
|
44x44x4.6
|
|
|
15.80
|
118
|
50x50x4.6
|
TEC1-12718
|
18.5
|
68
|
15.8
|
156
|
50x50x4.1
|
TEC1-12726
|
26
|
65
|
15.8
|
220
|
50x50x3.6
|
TEC1-03140
|
39
|
65
|
3.63
|
80.0
|
55x55x5.8
|

Definitions:
I Input Amps to the TEC (in Amps)
Imax Input Amps that produce the maximum DT [DTmax] (in Amps)
Qc Amount of heat that can be absorbed at the cold side face of the TEC (in watts)
Qmax Maximum amount of heat that can be absorbed at the cold side.
This occurrs at I = Imax and when DT = 0. (in Watts).
Th Temperature of the hot side face of the TEC (in °C)
Tc Temperature of the cold side face of the TEC (in °C)
DT Difference in temperature between the hot side (Th) and the cold side (Tc). dT = Th-Tc (in °C)
DTmax Maximum difference in temperature a TEC can achieve between the hot side (Th) and the cold side (Tc).
This occurrs at I = Imax and when Qc = 0. (in °C)
Vmax Voltage at I = Imax (in Volts) ****Never operate a module at maximum Vmax !
Always at 80% or less of Vmax.
******* Most of the above modules are special order. Please e-mail or Call. We require minimum volumes to
produce TEC's which are not listed below. We are able to produce small sample quantities of TEC's in our lab.
A minimum setup charge will apply plus the cost of the TEC's!
SPECIAL !
For the Month of April ORDER a Peltier cooling module
For your WINE CABINET !
TEC1-12704
TEC1-12706
Only 19.95 plus shipping and handling
CALL: 1-800-769-2395 to ORDER !!
WE SHIP WITHIN 48 HOURS OF ORDERING !!
|
 |
Our standard Modules are :
TEC1-12704
TEC1-12706
TEC1-12703
Our TEC1-12706 peltier module is our most popular module as they demonstrate both minimal power output but offer maximum cooling. Ideal as replacement modules for thermoelectric
wine cabinets.
When TEC's are manufactured they are batch produced and then classified based on performance TEC1-12706 TEC's typically fall in the middle of the pack. Therefore
they offer the best performance in relation to power consumption !! Thermoelectric modules are used to replace the heating and cooling components in water coolers, wine cabinets, car coolers, portable camping coolers. The Thermoelectric Peltier Chip (TEC) is the major part of a thermoelectric peltier water cooler.
The above thermoelectric peltier modules are used in the construction of thermoelectric appliances such as our MilkMate 2000, MilkMate 2005, Merchandiser 4Q, MilkMate 2G ( 2 gallon), and Wine Cabinets. We have designed condensing systems, sub zero coolers for medical labs, research labs as well as a host of other custom design applications!
We also supply thermoelectric parts for replacement in wine cabinets and water cooler products.
Revised 05/2009
Kooler Device Corp.
|